Copper Busbars Strips Sheets And Flats
Product Description
EDGE:
- Square Edge, Radius Edge, Full Radius Edge.
- Length: Up to 6400mm (21`) (depending on section) with standard overall cutting tolerance of 100mm.
SURFACE TREATMENT: Our Copper Flat Bar can be Electro-plated with Tin or Silver.
APPLICATIONS:
BUSBAR
- Transformer Connectors.
- Earthing Protection in L.T. and H.T. Electrical Panels.
- Power Transmission equipment.
- Control Panel.
|
Chemical Composition Of Copper |
||||
|
Material |
Normal Composition |
Nearest Relevant Composition Specification |
||
|
|
BS: 2870 |
ISO |
JIS |
|
|
Electrolytic Tough Pitch H.C. Copper |
Cu - 99.90% Min. |
C 101 |
Cu ETP |
H 3100 |
|
Pb - 0.005% Max |
1337 |
C 1100 |
||
|
Bi - 0.001% Max |
|
|
||
|
O2-0.060% Max |
|
|
||
|
Phosphorous Deoxidized Copper(DONA) |
Cu - 99.85% Min. |
C106 |
Cu DHP |
H 3100 |
|
P-0.013-0.050% |
1337 |
C 1220 |
||
|
* Material confirming to other National Specification e.g. ASTM, DIN etc. is also provided. |
||||
|
* Available in Strips, Sheets, Plates & Circles form. |
||||
|
COPPER |
||||||
|
TYPICAL MECHANICAL PROPERTIES AS PER : B.S. : 2870 |
||||||
|
Material |
Temper |
Tensile Strength N/mm2 |
Elongation% on 50 mm G.L. |
Vickers Hardness |
ISO |
JIS |
|
VPN |
||||||
|
Electrolytic |
'O' |
210 Min |
35 Min |
55 Max |
Cu ETP |
H 3100 |
|
Tough Pitch H.C. Copper |
M |
210 Min |
35 Min |
65 Max |
ISO : 1337 |
C 1100 |
|
|
1/2 H |
240 Min |
10 Min |
70 to 95 |
|
|
|
|
H |
290 Min |
- |
90 Min |
|
|
|
Phosphorous |
'O' |
210 Min |
35 Min |
55 Max |
Cu DHP |
H 3100 |
|
Deoxidized Copper |
M |
210 Min |
35 Min |
65 Max |
ISO : 1337 |
C 1220 |
|
|
1/2 H |
240 Min |
10 Min |
70 to 95 |
|
|
|
|
H |
290 Min |
- |
90 Min |
|
|
|
'O'b : |
Annealed Condition. |
|||||
|
1/2Hv: |
Half Hard |
|||||
|
Hb: |
Hard |
|||||
Other Products in 'Copper Products ' category
Contact Details
Send Inquiry |
MULTI ALLOYS INTERNATIONAL
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |